V-251 Tube Microphone

The V-251 Microphone is a recreation of one of the most famous tube microphones in history, the Telefunken ElaM 251.

We have implemented it with high-grade parts, including specially selected film-and-foil input and output capacitors, a selected low-noise 6072 tube, and a custom T/14 transformer. The result is a stunning single-triode tube mic that rivals the performance of multi-thousand dollar commercial microphones.

Like all of our custom microphones, the V-251 is built to order. Allow 3-5 business days for us to build it, burn it in, and test it. If you are facing a session deadline, contact us in advance to check the turnaround time.

Improvements to Vintage

Our V-251 improves on the original design in the following ways:

We use higher-value, audiophile-grade resistors to reduce the noise floor as compared to vintage European models -- without losing any tone or character.
We include a pad switch on the mic, to enable recording higher-SPL sources.
We include a high-pass filter switch on the mic, to enable control over proximity effect.
We allow 9 polar patterns (the original mic had 3). Pattern switching happens on the power supply.

Included

One hand-built-in-California boutique tube microphone, using our proprietary upgrades to the vintage ElaM 251 circuit, acclaimed RK-12 edge-terminated capsule, and T/14 output transformer.
Spider-style elastic shockmount. This attaches to the mic with two thumbscrews to tighten felt-lined metal bands around the mic body.
Complete power supply with 9-position polar pattern control, power cord and XLR7 cable.
Aluminum flightcase.

Cosmetics

The V-251 mic body has a black finish, with a vintage diamond MP logo badge on the front. (We do not have any custom color options for the V-251.)

We are aware that two of the product photos on this page show the older body style with laser-engraved 'micparts' text logo. That body has been out of production since 2021 or so. All V-251 mics have the diamond logo badge, which is made from brass, then plated, then antiqued.

Recommended Upgrades

Typical off-brand "professional microphone cables" can cause up to a half-volt in loss to the critical tube heater supply. We sell an upgraded cable made with genuine Gotham GAC-7 (imported from Gotham in Switzerland -- we do NOT use the thinner stuff from China sold as "Gotham" by online vendors), terminated in our shop with Neutrik connectors, then conditioned for 72 hours on a proprietary cable conditioning device.

The standard power supply that accompanies most tube microphones priced below $2500 is a diode-regulated design that can suffer from voltage drift. This can cause subtle changes to tube harmonics, which can be audible. Our "VPS1" power supply provides tightly regulated voltage, superior filtering, and slow ramp-up power to extend the life of the tube. It allows B+ and heater voltages to be set independently via internal trimpots. The VPS is available as a fully built, tested, and warrantied unit.

Our newest optional upgrade to the V-251 package is for the shockmount. The standard shockmount uses thumbscrews to clamp the mic into the mount. This device works, but is difficult to use. We developed a superior alternative: see our upgraded tube microphone clamp.

V-251 vs V-12

How does the V-251 differ from our V-12?

Both are premium DIY tube microphones based on vintage models. Both use the 6072 tube (selected for low noise and low microphonics). Both deliver exceptional performance, far above what the price point would suggest. But they differ in component selection, topology, features, and specifications:

The V-251 is a single triode, whereas the V-12 uses a more modern design using a dual triode/CCDA topology. The V-251 is a more authentic copy of the original 251 circuit.
The V-251 circuit has 6dB lower output.
The V-251 circuit has up to 12dB higher second harmonic coloration, and therefore sounds more "vintage." The V-12 is a bit cleaner, while the V-251 has more "vibe" or "tube sound."
The V-12 circuit has more headroom, which by itself would make it more suitable for recording higher-SPL sources. But the V-251 has a 10dB pad switch, which makes it equally capable of recording higher-SPL sources.
The V-251 provides a high-pass filter via external switch. The output capacitor for the HPF circuit is a NOS styrene component.
The V-251 uses a superior film-and-foil output capacitor.

In practice, both circuits offer performance rivaling commercial mics priced above $1900. The V-251 has additional features, and has more "tube sound" (2nd harmonic coloration). The V-12 has higher output, and therefore requires 6dB less preamp gain on quiet sources.

Which of these mics best suits your needs depends on what you record, and what features you need.

Hear the mic

Charlie and Ernesto at Ultimate Studios recorded a complete song (drums, guitars, bass, vocals, piano, organ) with just one Platinum Edition V-251. Watch the music video here: